It was found that the contents of volatile compounds and flavor components were related to the type of cigarettes and the amount of tar. The contents of volatile compounds and flavor components were higher in the flue-cured cigarettes than in the mixed cigarettes, and higher in the high tar cigarettes than in the low tar cigarettes. The types of fragrance components in smoke of different types of cigarettes are basically the same, but there are great differences in content. The contents of furfural, furfuryl alcohol, maltol, 5-hydroxymethylfurfural, linolenic acid, methyl linolenic acid, linoleic acid, methyl palmitate and other components in flue-cured cigarettes were significantly higher than those in mixed cigarettes. This is related to the higher carbohydrate content in flue-cured cigarettes. Mixed-type cigarettes contain high content of 3-methylpentanoic acid and nitrogen heterocyclic compounds such as cotinine, ho ah, and methamine due to their formulations of burley tobacco and spice tobacco. The filtering law of activated carbon for different types of cigarettes is basically the same, that is, the filtering efficiency is related to the properties of compounds, especially with the molecular weight and boiling point of compounds. The filtration efficiency of activated carbon on flue-cured cigarettes was lower than that of mixed cigarettes.Urban sludge is a carbon material rich in organic matter. The preparation of activated carbon can not only solve the disposal problem of sludge, but also generate efficient and cheap adsorbent, which conforms to the scientific concept of circular economy and sustainable development.
In this paper, the sludge of the municipal sewage plant was used as raw material, and the activated carbon was prepared by chemical activation method, and the adsorption of lead and cadmium was studied with it, so as to realize the use of waste for waste control. The conclusions are as follows:(1) According to the relevant national standards, the sludge of Liede Sewage Treatment Plant is mainly composed of volatile organic compounds, with a volatile content of 64.86%, which can be used as the main raw material for the preparation of activated carbon.
(2) Without adding additives to the sludge, the concentration of sulfuric acid and zinc chloride is 4 mol·L' and the volume ratio is 2:1. The activated carbon prepared has the maximum iodine adsorption value of 549.6 mg·g 'and the yield of 51.3%, which is the better carbon sample prepared by pure sludge and is recorded as SAC.(3) Adding 8% peanut shell, the iodine value of activated carbon of sludge reached 789.6mg · g', which was recorded as PAC
activated carbon manufacturers in chinaBy single factor experiment, the optimal conditions of carbon production were obtained as follows: pyrolysis temperature 600℃, activator concentration 4 mol · L', pyrolysis time 1.5h, solid-liquid ratio 1:2.5.Orthogonal experiment showed that the influence of each factor was as follows: pyrolysis temperatureIs the activator concentration Pyrolysis time >Solid-liquid ratio.(4) the main performance of PAC is basically equivalent to 8818 type activated carbon;
pellet activated carbon