Ceramic Filter Malaysia Product can remove metal slag, and the solution of metal impurities is much stronger than other filter media, and it combines physical and chemical principles to filter it.

The large impurities on the filter surface include physical barriers, interceptors and tiny impurities, which have chemical affinity and are attracted to the filter surface, sidewalls or pores.

Therefore, impurities are effectively filtered from cast products of various sizes, including impurities that are much smaller than the pores for filtering impurities.

This filter can comb the entire disordered molten metal flow, reduce turbulence, and make molten metal

The flow should be smooth and clean.

porous ceramic filter
Malaysia Product to reduce casting defects. porous ceramic filter has the characteristics of light weight, high mechanical strength, large specific surface area, high porosity, excellent thermal shock resistance, chemical corrosion resistance and high temperature stability in molten metal.

Through the distributed mesh structure, they can increase the surface area and absorb the sintered ore, the liquid metal becomes more pure, and the incidence of waste quality problems such as sand holes and pores is greatly reduced. The casting quality becomes better.

Ceramic Foam Filter Manufacturers In India Product

Aluminum casting molten metal filter installation

The filtration efficiency of porous ceramic filter in aluminum plants is closely related to their correct installation and use.

At the same time, due to the filtration process, the conventional and necessary measures taken to reduce the generation of inclusions in process operations such as smelting, furnace treatment and casting cannot be ignored.

It is also necessary to prevent re-contamination of the filtered clean aluminum liquid.

When casting products, remove impurities in molten metal, refractory waste, solid refractory alloys, sintered ore, eliminate turbulence, reduce casting porosity, and improve casting quality.

Therefore, our ceramic foam filter (foam ceramic) is widely used in the aluminum casting industry to prevent defects caused by oxides, scum, gas, slag and other impurities.

Ceramic Filter Malaysia Product eliminates the turbulence in the metal flow, makes the metal flow smooth, avoiding spray, splashing and collapse.

Improve fluidity, castability, workability, output and cost-effectiveness.

Remove a larger proportion of fine particles, reduce waste and rework.

Provide consistent flow rate and capacity.

Various sizes, shapes and apertures are available.

How high efficiency filtration improves the whole process

AdTech porous ceramic filter have the advantage of improving molten metal handling, casting, machining and finished products themselves.