In view of the characteristics of large amount of matter and high content of benzene organic matter in gas, the method of removing these substances is studied and the solution is given.
In this study, the concentration of benzene, naphthalene and ash in gas before purifying feed-gas compressor was determined by chromatograph, picric acid titration and weighing method respectively. According to the measured values, the experimental flow was designed, and coke column and activated carbon column were made by themselves.
The isobarisothermal adsorption properties of activated carbon at different temperatures, at different pressures and at different flow rates were determined by using the gas produced in the system as samples.
The adsorption effluent curve of benzene by activated carbon was plotted.coal activated carbon supplier
The effects of different temperature on the regeneration performance of activated carbon under static environment, the effects of steam at different temperature on the regeneration performance of activated carbon under dynamic environment and the effects of nitrogen at different temperature on the regeneration performance of activated carbon under dynamic environment were studied.
The experimental results showed that high pressure and low temperature were beneficial to the adsorption, and the flow rate had little effect on the equilibrium adsorption capacity in the range of experimental flow rate. The adsorption capacity of benzene by activated carbon in the experiment was 150~170mg/g under operating conditions.
At the same time, the filtration and adsorption properties of coke were tested.granular activated charcoalis very weak, can not be used as the nitrogen adsorbent, but the coke filter and adsorption performance of ash and naphthalene is very good, the content of naphthalene and ash after the gas through the coke column completely meet the design requirements.
The results show that the combined use of coke and activated carbon in the gas system can completely achieve the purpose of removing benzene, naphthalene and ash.
According to the above research results, a coke filter was designed. The application of the equipment solved the problems that the feedstock gas compressor in the urea blackening unit could not run for a long period due to the vibration caused by the scaling of the rotor, the blockage of the flow channel and the problems that the naphthalene formation in the heat exchanger affected the heat transfer effect.Chapter 1 This project adopts the company's own large amount of monolayer stone which can be dried and preserved and treated with solution
Preparation method of graphite namely graphene.
Raw materials are commonly used graphite and common chemicals, easy to operate, easy to enlarge. It solves the problem that graphene materials are expensive and cannot enter the field of industrial application without large-scale production. It provides a basis for large-scale application of graphene.Using the super conductivity and large specific surface area of graphene solves the problem that the traditional activated carbon material can no longer improve the electric storage performance when used on the electrode. Complete set of equipment in addition to solve the industrial method of graphene liquid phase composite to activated carbon materials for super capacitor, and can be activated activated carbon materials at room temperature. Complete sets of equipment meet the requirements of cleaner production.

China has a large population and is short of forest resources. The per capita forest stock volume is 0.12m3, lower than the world average level of 0.65 m3.China's wood comprehensive utilization level is also low, only 40%, and advanced countries can reach 80%, and in the level of technology, product grade, production efficiency, market competitiveness and other aspects compared with the developed countries also have a big gap.
coal activated carbon supplier
At present, China consumes 250 million MR of wood annually, and imports 3 billion US dollars of wood and forest products annually to make up for the shortage.In order to ensure the fundamental interests of China's forestry enterprises, extend the industrial chain of wood processing products, and promote the development of China's timber industry to the efficient utilization of wood based on the deep processing of products and the comprehensive utilization of raw materials, it has become the pursuit of China's forestry industry
Water rice only previews downloaded documents in HD without watermark
The target of the.Yakeshi city junxi wood industry co., LTD. To meet the needs of market development, actively develop wood waste processing projects, has made the enterprise in technology, management, personnel with a strong development potential.granular activated charcoal

Distillation, activation treatment after the production of activated carbon methods are :① steam, gas activation method.Carbon is activated by water vapor or carbon dioxide at 850~900℃.
② chemical activation method.Activated carbon can be obtained after high temperature treatment by using the gas released by the activator or soaking the raw material with the activator.Activated carbon has a micro product structure, the micro product arrangement is completely irregular, the product body has micropores (radius is less than 20[angstroms]=10-10 meters), through the hole (halfDiameter 20~1000), large hole (radius 1000~100000), so that it has a large inner surface, specific surface area of 500~1700 m 2/ g.This determines that activated carbon has good adsorption, can adsorb the metal ions in waste water and waste gas, harmful gases, organic pollutants, pigments and so on.wholesale activated carbon pellet
Industry should beActivated carbon also requires high mechanical strength, good wear resistance, its structure is stable, small energy required for adsorption, in order to be conducive to regeneration.Activated carbon for oilDecolorization, deodorization, gas separation, solvent recovery and air conditioning of fat, beverage, food and drinking water, used as catalyst or adsorbent for body and gas mask.Physical characteristics:Activated carbon is a kind of multi-aperture carbonization, has a very rich pore structure, has good adsorption characteristics, its adsorption by physical and chemicalAbsorbed from the force, the appearance of the color and lustre is black.Its composition in addition to the main carbon, but also contains a small amount of hydrogen, nitrogen, oxygen, its structure is shaped like a hexagon, due to the irregular hexagon structure, determine the characteristics of its body also incandescentand high surface area, each gram of activated carbon has the equivalent of 1000 square meters than the surface.www.chinactivecarbon.com/

At present, China consumes 250 million MR of wood annually, and imports 3 billion US dollars of wood and forest products annually to make up for the shortage.In order to ensure the fundamental interests of China's forestry enterprises, extend the industrial chain of wood processing products, and promote the development of China's timber industry to the efficient utilization of wood based on the deep processing of products and the comprehensive utilization of raw materials, it has become the pursuit of China's forestry industry
Water rice only previews downloaded documents in HD without watermarkchina active carbon
The target of the.Yakeshi city junxi wood industry co., LTD. To meet the needs of market development, actively develop wood waste processing projects, has made the enterprise in technology, management, personnel with a strong development potential.activated carbon pellets wholesale

The background of the project and the necessity of investment construction
In recent years, with the continuous decrease of wood resources and the deterioration of ecological environment worldwide, environmental protection, the realization of sustainable development and comprehensive utilization of resources have become a common concern ofpeople and a problem that the international community is committed to solving.To further improve the level of comprehensive utilization of wood resources and the added value of products has become the main goal of the world wood processing industry.
China has a large population and is short of forest resources. The per capita forest stock volume is 0.12m3, lower than the world average level of 0.65 m3.China's wood comprehensive utilization level is also low, only 40%, and advanced countries can reach 80%, and in the level of technology, product grade, production efficiency, market competitiveness and other aspects compared with the developed countries also have a big gap.By use.Generally there are three kinds.
(1) gas phase adsorption of activated carbon.https://www.powdered-activated-carbon.com/
Can be used for exhaust treatment, air purification, solvent recovery, gas separation, deodorization, desulfurization and denitration, industry.Raw material gas refining, gas chromatography filler, air sampler, fresh-keeping, ozone removal, cigarette filter nozzle, gas adsorption storage, military and civil gas masks, etc.(2) liquid phase adsorption of activated carbon.Tap water treatment, pure water manufacturing, industrial and domestic sewage advanced treatment, decolorization refining, blood purification, gold recovery, double capacitor electrode, pharmaceutical carbon, etc.(3) catalyst (catalyst) with activated carbon.
Both can be directly used as a catalyst for this industrial process (such as phosgene synthesis, synthesis of vinyl acetate, etc.), more time activated carbon is used as a catalyst carrier (such as carrying precious metal pins, men, palladium, nails, gold made of pin carbon, palladium carbon catalyst, etc.).(1) solvent recovery.Such as recycling printing industry with xylene, toluene, benzene and other solvents;Recycling organic solvents such as ethanol, acetone, ester and ether from plastics and artificial leather industry;Recycling of hexanone in tape factory;Recycling of dichloromethane from resin processing plants, etc.(2) air purification.Such as electronic, pharmaceutical industry aseptic workshop air purification;Removal of ozone in the air of the copy room and computer room;The removal of foreign odor in the air of confined space;Odor removal from refrigerators, etc.(3) Nuclear and biochemical protection.Nuclear radiation, biological warfare agents, chemical warfare agents are weapons of mass destruction, activated carbon is loaded with a variety of chemical agents can effectively protect it
Activated carbon or chemical-loaded activated carbon is often used as a key component of personal protective equipment in the presence of toxic gases in the civilian industry. During the SARS crisis in late 2002 and early 2003, special protective masks with activated carbon loaded with silver played a role in protecting health care workers.http://www.activated-carbon-pellets.com

The target of the.Yakeshi city junxi wood industry co., LTD. To meet the needs of market development, actively develop wood waste processing projects, has made the enterprise in technology, management, personnel with a strong development potential.
development and comprehensive utilization of resources have become a common concern ofpeople and a problem that the international community is committed to solving.To further improve the level of comprehensive utilization of wood resources and the added value of products has become the main goal of the world wood processing industry.
China has a large population and is short of forest resources. The per capita forest stock volume is 0.12m3, lower than the world average level of 0.65 m3.China's wood comprehensive utilization level is also low, only 40%, and advanced countries can reach 80%, and in the level of technology, product grade, production efficiency, market competitiveness and other aspects compared with the developed countries also have a big gap.Both can be directly used as a catalyst for this industrial process (such as phosgene synthesis, synthesis of vinyl acetate, etc.), more time activated carbon is used as a catalyst carrier (such as carrying precious metal pins, men, palladium, nails, gold made of pin carbon, palladium carbon catalyst, etc.).(1) solvent recovery.Such as recycling printing industry with xylene, toluene, benzene and other solvents;Recycling organic solvents such as ethanol, acetone, ester and ether from plastics and artificial leather industry;Recycling of hexanone in tape factory;Recycling of dichloromethane from resin processing plants, etc.(2) air purification.Such as electronic, pharmaceutical industry aseptic workshop air purification;Removal of ozone in the air of the copy room and computer room;The removal of foreign odor in the air of confined space;Odor removal from refrigerators, etc.(3) Nuclear and biochemical protection.Nuclear radiation, biological warfare agents, chemical warfare agents are weapons of mass destruction, activated carbon is loaded with a variety of chemical agents can effectively protect it https://www.powdered-activated-carbon.com/
Activated carbon or chemical-loaded activated carbon is often used as a key component of personal protective equipment in the presence of toxic gases in the civilian industry. During the SARS crisis in late 2002 and early 2003, special protective masks with activated carbon loaded with silver played a role in protecting health care workers.http://www.activated-carbon-pellets.com

The preparation methods of activated carbon include physical method, chemical method, microwave radiation method, etc.(1) Physical method.
Physical method is to use carbon dioxide, water vapor or the mixture of both as activator, the carbonized carbon material and gas in the activation furnace at 500~1200℃ for carbon activation reaction, so that the pore size of the carbonized material to expand, the formation of activated carbon with porous microcrystalline structure.Gas activation method mainly includes carbonization and activation engineering.The so-called carbonization, refers to the low temperature (about 500℃) is small, the volatile coal tar molecules in the material and the thermal decomposition and curing process of asphalt, that is, to remove the volatile in advance, made suitable for the next step of activation with carbonization.gold recovery activated carbon
When the temperature is below 600℃, the specific surface area of carbonized material increases with the increase of temperature.When 600~900℃, the specific surface area reaches a certain value: 250~300 m2/g; when above1000℃, the specific surface area shrinks rapidly.coconut activated carbon factory
When the carbonization temperature is above 800℃, the reaction performance of carbonized compounds and activation gas gradually becomes weaker, so the carbonization temperature is generally below 1000℃. However, if the residual volatile content and thermal effect are taken into account, the most suitable temperature should be 600~700℃39].
The carbonized substance obtained from the carbonization process is placed in water vapor or a mixture of water vapor and combustion gas and heat treated at 800~1000℃, which is called the activation process.

In painting, printing, shoe making, plastic, rubber, bonding and other industrial processes, there are a large number of organic waste gas emissions.These waste gas, often contain benzene, toluene, xylene, ethyl acetate, methanol and other organic matter, itself toxic, long-term damage can lead to human death.The emission of this kind of waste gas, countries have clear provisions, strict control of its emission concentrationThe treatment of organic waste gas has been studied for a long time, and some effective control technologies have been developed.The widely used and studied control techniques include adsorption method, thermal destruction method, condensation method, absorption method, etc.gold recovery activated carbon
Among them, the adsorption method is widely used.Compared with other methods, the adsorption method has the advantages of high removal efficiency, thorough purification, low energy consumption, mature technology, recovery and solution, easy popularization and practical, and has good environmental and economic benefits.Activated carbon is the most commonly used adsorbent because of its huge specific surface area, large adsorption capacity, easy regeneration, abundant sources and low price.Although the application of charcoal as an adsorbent, human beings have had a long time, but the study of adsorption theory, but only in the end of the last century began to make progress.In painting, printing, shoe making, plastic, rubber, bonding and other industrial processes, there are a large number of organic waste gas emissions.These waste gas, often contain benzene, toluene, xylene, ethyl acetate, methanol and other organic matter, itself toxic, long-term damage can lead to human death.The emission of this kind of waste gas, countries have clear provisions, strict control of its emission concentrationThe treatment of organic waste gas has been studied for a long time, and some effective control technologies have been developed.The widely used and studied control techniques include adsorption method, thermal destruction method, condensation method, absorption method, etc.
Among them, the adsorption method is widely used.Compared with other methods, the adsorption method has the advantages of high removal efficiency, thorough purification, low energy consumption, mature technology, recovery and solution, easy popularization and practical, and has good environmental and economic benefits.Activated carbon is the most commonly used adsorbent because of its huge specific surface area, large adsorption capacity, easy regeneration, abundant sources and low price.Although the application of charcoal as an adsorbent, human beings have had a long time, but the study of adsorption theory, but only in the end of the last century began to make progress.
coconut activated carbon factory

CO, the activator, the activation of the burning loss rate is large.
However, the pore structure of activated carbon was not developed, indicating that the newly formed potassium carbonate in the pore channels was more likely to react with carbon during the activation process of potassium hydroxide, and the pore structure was further developed.activated carbon pellets wholesale
According to the standard Gibbs free energy of the reaction, K· Co;
(or K;O) direct reaction with carbon is difficult to be carried out at the activation temperature of 730℃, indicating that they react with -CH- and -CHZ - in petroleum coke and play an activation role.The elemental potassium generated from the activation reaction intercalated and activated the petroleum coke, and the specific surface area of the activated product reached 98m'g1.XRD analysis showed that there were potassium to graphite intercalated compounds in the activated product.According to the study results of activation mechanism, the mixing of additive N can improve the dispersion of alkali and the activation of additive N at high temperature to improve the activation effect.Activated carbon with a yield of 68% and a specific surface area of 2532m'g can be obtained under the conditions of alkali-coke ratio of 3:1, activation temperature of 730℃ and activation time of 30 minutes.At the same time, the amount of hydrogen produced in the activation reaction is large, reaching 38cm'g 'min', and hydrogen can be separated and purified.
Thus, a one-step process for the preparation of activated carbon with high specific surface area was proposed.Compared with the conventional method, the process reduces the production cost, shortens the production time, saves energy, and lays a foundation for further industrial production.The prepared petroleum coke based activated carbon was used as the carrier.The catalyst supported by Ni-Mo has similar hydrodesulfurization activity with commercial catalysts. The DBT conversion rate is more than 98% at 290℃ and the catalyst has high stability.The pore size distribution of petroleum coke based activated carbon with high specific surface area is mostly between 1.0~ 2.0nm. The methane storage experiment using this sample shows that it has a high methane storage performance: at 1.4 MPa, room temperature, the mass adsorption capacity of methane is 0.112 Gg '.www.powdered-activated-carbon.com

Activated carbon, is black powder or block, granular, honeycomb amorphous carbon, activated carbon gold miningbut also a regular arrangement of crystalline carbon.In addition to carbon elements, activated carbon also contains two kinds of admixtures: one is the chemical combination of elements, mainly oxygen and hydrogen, these elements are due to incomplete carbonization and residual in the carbon, or in the activation process, foreign non-carbon elements and activated carbon surface chemical combination;Another kind of admixture is ash, which is the inorganic part of activated carbon, and ash in active carbon is easy to cause secondary pollution.Because of its strong adsorption, activated carbon is widely used in production,In the life.Activated carbon material is processed by the amorphous carbon, has a large specific surface area, the gas, solution of inorganic or organic matter and colloidal particles have good adsorption capacity.Activated Carbon materials mainly include Activated Carbon (AC) and Activated Carbon Fibers (ACF), etc.Activated carbon material as a kind of excellent adsorbent, mainly because of its unique adsorption surface structure and surface chemical properties.Activated carbon material has stable chemical properties and high mechanical strength.activated carbon company